10 mil Lead Tape Clamshell Package
20,00 €*
MORE INFORMATIONS:- applied to the Clubhead to adjust swing weight, feel and ball flight - 1/2" x 100"
2"x9" Golf Grip Tape Strips Bagged
7,80 €*
MORE INFORMATIONS:- 15 Strips with Installation Instruction
5 mil Lead Tape Clamshell Package
14,00 €*
MORE INFORMATIONS:- applied to the Clubhead to adjust swing weight, feel and ball flight - 1/2" x 100"
Auditor Club length tipping ruler
Auditor Club length tipping ruler- most reliable shaft and golf club ruler. Features a special shaft trimming system for speed and accuracy.- ideal tool for aligning shaft spine marks and logosHändlerpreise auf Anfrage.
B1 - Hosel Boring Fixture
MORE INFORMATIONS:Hosel Boring Fixture features a T-Handle Brass Jaw that protects
club finish and aligns hosel vertically. Precision machined to use with both
irons and metal woods. Clamps to a drill press table with a C-Clamp. Works
great on hard to remove broken shafts. Bore out taper tip hosel to parallel
tip. It is recommend the use of 8.6 mm, 8.9 mm, 9.4 mm and Letter Z drill bits
for parallel tip hosels.
Bagged Pro Fix 20/20 Long Cure Epoxy 0.85 ounce Cartridge
13,80 €*
MORE INFORMATIONS:- forms a tough off-white bond line that provides very high impact resistance and shear strength. The two-component adhesive is mixed 1:1 by volume and has a 20-30 minute work life and a 20 hour cure at room temperature.
Black Pigment 2 oz Squeeze Bottle
11,80 €*
MORE INFORMATIONS:- can be used to add intense solid black colour to any epoxy resin.
Club Lenghts Ruler with RH-LH Lie Angle soling plate
Auditor Club length tipping ruler- most reliable shaft and golf club ruler. Features a special shaft trimming system for speed and accuracy.- ideal tool for aligning shaft spine marks and logosHändlerpreise auf Anfrage.
CLUBLENGTH Ruler Measuring Tool Kit
MORE INFORMATIONS:(Complete
Kit) is the perfect golf club ruler for accurately measuring overall length of
woods, irons, and putters. The ruler is engineered with a unique sole centering
method guaranteeing accurate lengths for all lie angles. This ensures a
consistent length progression between clubs in every set. Conforms to USGA
method for measuring maximum driver length of 48″.
Clubmakers Standard Calibration Stick
Clubmakers Standard Calibration Stick- encompassing all the calibration standards- measurements for mass, Frequency, 1st. and 2nd Moment of inertia, length and spring rateHändlerpreise auf Anfrage.
Compact Bounce Angle Gauce
Compact Bounce Angle Gauge- Tool for custom fitting short irons- speciality wedges and utility clubs- Measures bounce, dig angle, sole width, leading edge height- Magnetic base- Accurate to within 0.5 degrees
Compact Pneumatic Speed Gripper
Compact Pneumatic Speed Gripper- stand by bare-bone industrial pneumatic gripping station that can be installed anywhere on a production line quickly to speed up assembly.- Bolts onto a workbench or our transformer standHändlerpreise auf Anfrage.
Compact Speed Gripper
Compact Speed Gripper- OEM Production lines where speed and high yield are essential requirements- The club is secured in the vise and the shaft is dipped into the solvent tank, before the grip is slipped on dry over the wet grip tape. Works great with brush - on grip adhesives if usedHändlerpreise auf Anfrage.
Complete Grip Kit
23,80 €*
MORE INFORMATIONS:Available: 25 Kits per CaseThe Grip Kits includes:- 15 Grip strips (double sided tape 2 inches x 9 inches long)- 4oz spray bottle of HIF-100 Grip Tape Activator- Rubber vice clamp- Poly display bag- 8 Easy Step Instruction card for grip application
Deep throat club length ruler with lie angle gauge
0,00 €*
Deep throat club length ruler with lie angle gauge- ruler can handle difficult to measure clubs like double bend putters- Unique ruler provides a cut out deep throat correct lie angle-split level measuring plane for clubs used with oversized gripsHändlerpreise auf Anfrage.
Golf DigiFlex 2.0 Frequency Meter W/ Portable Base Plate
MORE INFORMATIONS: - Constant pressure shaft clamp- State of the art Measurement system is
firmware updatable to be future proof- Less than .5 CPM to 30,000 CPM count in
0.01 CPM increments- 16 cycle counts for accuracy- Selectable average from 1 to 5 readings- Built in error detection- Lithium battery for hours of operation- Operational during charging- Can be powered from any standard USB port
for charging and operation
Golf Grip Remover Gun W/ 6 Needles
MORE INFORMATIONS:- includes 6 needles and features a new canister with a pressurized pump that prevents rust building-up in grip solvent. Quick change needles are 16-Gauge.
Golf Tour Gauge Digital Irons Machine
MORE INFORMATIONS:- This
golf club measuring gauge utilizes a precision slide-bearing gauge assembly
that tracks on a precision ground slide rail for measuring both right- and
left-hand irons. Loft and lie measurements are recorded in 1/4° increments in
the LED Digital display. Converts to left-hand by moving the toe stop to the
opposite side of the face fixture.
Graphite Shaft Puller Commercial E-Z Model
MORE INFORMATIONS: - Best Model Available- Great For Heavy Volume Use- Precision CNC Machined- Low Friction Bearing Extracting Rod- Balanced Speed Handle- Bench Or Vise Mount- 2-1/2″ Rubber Clamps- T-Handle Top Clamp- Selectable .335″ – .500″ Hosel Stop
Graphite Shaft Puller Pro
MORE INFORMATIONS:- Precision CNC Machined- Smooth Turning T-Handle Extracting Rod- Vise Mount- 2-1/2″ Rubber Clamps- T-Handle Top Clamp- Selectable .335″ – .500″ Hosel Stop
HF-100 Grip Tape Solvent 128oz Gallon Bottle
49,00 €*
MORE INFORMATIONS:- Non-toxic- Non-flammable- Odorless- Effective with all standard grip tapes- Reusable- Easy clean up- Economical - use half the normal amount to apply the grip
HF-100 Grip Tape Solvent 32oz Quart Bottle
25,00 €*
MORE INFORMATIONS:- Non-toxic- Non-flammable- Odorless- Effective with all standard grip tapes- Reusable- Easy clean up- Economical - use half the normal amount to apply the grip